Thread Seal (PTFE Teflon tape) is a milky white pure PolyTetraFluoroEthylene and is a thermoplastic member of fluoropolymer family of plastics. It is a dynamic sealant, which adjusts its state during the installation. Creates a perfect seal by calendaring the PTFE into film in the exact thickness required between the two pipe ends. It is one of the idealistic materials for pipe joints in a household and industrial applications. Its versatility and unique features makes it widely used is all sorts of plumbing activities right from water to any other chemically hazardous materials

Guarantee of length
Flexible and resilient
Low coefficient of friction
Excellent insulating properties
Chemically inert to most acids and alkalies
Withstands high and low temperatures & pressures
Non-stick in nature
Corrosion resistant
Anti - aging and hence no limitation on shelf life
It is self-lubricant in nature
It is not flammable and does not burn

The threaded parts that need to be insulated from leakages should be free from dirt, rust, oil, grease etc. If required use kerosene for this. Dry the threads and then start installing the thread seal tape in a manner as mentioned below. Beginning at the end of the thread, wrap the tape in an overlapping fashion on the threads in a haphazard manner in the direction of the thread. Concentrate on the end of the pipe and cover only 20mm to 25mm of the threaded portion. The tape being highly pliable easily embeds in the threads.

The ideal number of wraps is, For ½" Pipe 12 (Fine threads) & 18 (Coarse threads) wraps For 1 ½" Pipe 16 (Fine threads) & 24 (coarse threads) wraps For other pipe diameters adjust the number of wraps.

Thread seal tape is an ideal material for all types of pipe and joint fittings. PTFE tapes can be used with all types of pipe, including iron, steel, copper, brass, alloys, plastics and even rubber.

Physical state	White tape
Odour and Appearance	Odourless
Heat Resistance	+370 Deg C
Cold Resistance	- 19 Deg C
High pressure resistance	150 - 200 Kg / cm2
Elongation	25 % min.

Length	12m	6m
Width	12mm	12mm
Thickess	0.1mm	0.1mm
Density	0.45g / cm3	0.45g / cm3

Being non-aging in nature has got a very long shelf life. Store in a cool & dry place, away from moisture, excessive heat and sources of ignition

Sr no:	Packing	Retail Box	Inner	Master	MRP
1	6.0m	10 pcs	250 pcs	1000 pcs	10/-
2	12.0m	10 pcs	250 pcs	1000 pcs	18/-

First aid measures:
Inhalation Not expected to becomes a significant inhalation hazard under normal conditions

Ingestion If ingested the product is not expected to cause acute reaction.Give two glasses of water to drink and consult physician.

Eyes  Not expected to come in contact with eyes, in event of exposure no effects observed except normal irritation caused due to foreign body.Wash thoroughly with running water, if irritation continues consult physician.

Skin Skin contact may in isolated case cause irritation,If happens wash throughly with soap and water .If irritation continues consult physician.
Keep out of reach of children.

Can this tape be used in all sorts of application?
Generally PTFE tapes are avilable in different grades. The parameters like density, elongation, thickness,and chemical stability of Teflon etc vary as per the grade and subject to applications. We recommend the tape to be used in Hydraulic and Pneumatic applications.

What is the shelf life of this tape? Generally Teflon tape is non-aging in nature and hence can have a life as much as 50 years if stored properly.

How many threads are to be converted with teflon tape for better result?
Ideally for best results a thread length of 20 to 25mm is to be winded teflone tape. But it varies with diameter of pipe and nature of threads like fine or coarse.
For example:
For 1/2" Pipe 12 (Fine threads) & 18 (Coarse threads) wraps
For 1 1/2" Pipe 12 (Fine threads) & 24 (Coarse threads) wraps
For other pipe diameters adjust the number of wraps.