FAQS
FEEDBACK
NETWORK OFFICES
CONTACT US
QUICK DOWNLOADS
BUSINESS LINES
KORES PRODUCTS
|
Adhesive & Sealant - K - Tite Rapid
 | |
Product:
Epoxy Compound
Brand Name: K - Tite Rapid
Product Category: Maintenance and Repairing
| Target Retail Audience |
| Sanitary & Plumbing, Hardware and Electric, Paints, Auto Spare Parts, Masonary, Stationery and other general outlets. |
K- Tite K- Tite Rapid (Fast Setting Epoxy Adhesive) is a versatile two component thermosetting and multipurpose Epoxy adhesive consisting of Resin & Hardener, which on mixing in a specified proportion solidifies by polymerization. It gives strong and long lasting bond, much faster than conventional epoxy adhesive. At room temperature, bonded surfaces attain handling strength in 10 minutes and full curing in 1 hour.
|
|
|
Unique Features: |
Sets rapidly in 5 minutes
Strong and durable bond
No shrinkage after curing
Saves time & money
|
|
|
How to use: |
Clean & dry both the surfaces to remove dirt, grease, oil, moisture etc. For better bond roughen the surfaces with emery paper. Apply thin coat of mixture on both the surfaces immediately with the help of metal applicator. Use the mixture within 5 minutes. Join the surfaces. Wipe out excess mixture immediately. Hold the surfaces together under slight pressure using string, rubber bands, clamps or tapes. Remove pressure after 1 hour.
|
|
|
Applications: |
K - Tite Rapid bonds virtually anything to anything like metals, ceramic, chinaware, marble, granite, Ivory, asbestos, glass, wood, leather, rubber concrete and most plastics. It is however not suitable for PVC, polyethylene, polypropylene, PTFE, silicon rubber etc.
|
|
|
Technical Specifications: |
| Resin |
Hardener |
| Viscosity | 45000 cps |
210 cps |
| Color | Milky White |
Light brown |
| Appearance | Viscous Liquid opaque |
Viscous Liquid opaque |
| Flash point | 25 |
25 |
| Toxicity | Non Toxic |
Non Toxic |
| Mixing Ratio | 1
100 |
1
80 |
| Pot life |
5 - 10 min at 25 deg C |
| Initial Setting Time |
5 - 10 min at 25 deg C |
| Setting Time |
1 - 2 hours at 25 deg C
|
| Curing Time |
24 hours at 25 deg C |
|
|
|
Typical Properties: |
Tensile shear Strength (M.S. to M.S.) - 80 to 90 kg / cm2
|
|
|
Shelf Life: |
Minimum 1 year if stored properly in a cool and dry place.
|
|
|
Packaging: |
| Sr no: |
Packing |
Inner |
Master |
MRP |
| 1 |
5gm Pouch |
400 pcs |
1600 pcs |
10/- |
| 2 |
7.0gm |
24 pcs |
864 pcs |
20/- |
| 3 |
13.0gm |
24 pcs |
864 pcs |
30/- |
|
|
First Aid Measures: |
|
Resin |
Hardener |
| Skin |
Flush immediately with water |
Flush immediately with water |
| Eyes |
Flush with water for 15 min.Get medical attention |
Flush with water for 15 min.Get medical attention |
| Inhalation |
Provide fresh air, oxygen or Artificial respiration |
Provide fresh air, oxygen or artificial respiration |
| Ingestion |
If drowsy or unconscious no Liquids, otherwise 2 glasses Of water and induce vomiting. |
Give large quantities of water / milk do not induce vomiting. |
|
|
|
FAQ'S |
What is pot life or usable life?
Pot life or usable life is the amount of time that the adhesive has before it becomes unusable.
What is 'handling time'?
This is the time after which the bonded joints or assembly can be safely handled or
removed from any holding jigs or clamps. A further period of time is required to reach full cure and the full performance capability of the adhesive and the bonded assembly.
What is cure time?
This is the amount of time required for the adhesive to reach its' specified performance properties. This time is typically temperature dependent, the lower the temperature the longer the time required.
|
|
|