FAQS
FEEDBACK
NETWORK OFFICES
CONTACT US
QUICK DOWNLOADS
BUSINESS LINES
KORES PRODUCTS
|
Adhesive & Sealant - K - Tite
 | |
Product:
Epoxy Compound
Brand Name: K - Tite
Product Category: Maintenance and Repairing
| Target Retail Audience |
| Sanitary & Plumbing, Hardware and Electric, Paints, Auto Spare Parts, Masonry, Stationery and other general outlets. |
K- Tite K- Tite (Super Strength Epoxy Adhesive) is a versatile two component thermosetting Epoxy adhesive consisting of Resin & Hardener, which on mixing with Resin in a specified proportion solidifies by polymerization.
|
|
|
Unique Features: |
Versatile
Strong and durable bond
No shrinkage after curing
|
|
|
How to use: |
The surfaces to be bonded should be free of dirt, oil and grease. Metallic surfaces should be abraded and cleaned before application. Rubber should be cleaned thoroughly and the surface to be bonded should be roughened.
|
|
|
Applications: |
K - Tite bonds virtually anything to anything like metals, ceramic, marble, granite, most plastics / PVC, Ivory, asbestos, glass, wood, leather, rubber etc. It is however not suitable for plastics like polyethylene, PTFE, silicon rubber etc.
|
|
|
Technical Specifications: |
| Resin |
Hardener |
| Viscosity | 45000 cps |
35000 cps |
| Color | Off White |
Light brown |
| Appearance | Viscous Liquid opaque |
Viscous Liquid opaque |
| Flash point | 25 |
25 |
| Toxicity | Non Toxic |
Non Toxic |
| Mixing Ratio | 1
100 |
1
80 |
| Pot life |
45 - 60 min at 25 deg C |
| Initial Setting Time |
5 - 6 hours at 25 deg C |
| Curing Time |
24 hours at 25 deg C |
| Temperature: |
Bonding withstands temperature from -50 deg C to + 120 deg C
|
|
|
|
Typical Properties: |
| No |
Typical Properties |
Kg / cm2 |
| 1 |
Adhesive lap shear strength: (MS to MS)After 24 hours @ 30 deg. C (ASTM D 1002: 1983) |
180 - 200 |
| 2 |
Cleavage Strength:After 24 hours @ 30 deg. C (ASTM D 1002: 1983) |
> 70 |
| 3 |
Heat resistance: Adhesive lap shear strength: (MS to MS)Joint heated at 80 deg. C for 14 days after cure(ASTM D 1002: 1983
|
175 - 195 |
| 4 |
Water Resistance: (Durability) Adhesive lap shear strengthFor MS to MS joint after water immersion @ 30 deg. C for 14 days. |
160 - 180 |
|
|
|
Shelf Life: |
Minimum 1 year if stored properly in a cool and dry place.
|
|
|
Packaging: |
| Sr no: |
Packing |
Inner |
Master |
MRP |
| 1 |
6.5gm |
24 pcs |
864 pcs |
10/- |
| 2 |
9.0gm |
24 pcs |
864 pcs |
20/- |
| 3 |
13.0gm |
24 pcs |
864 pcs |
25/- |
|
|
First Aid Measures: |
|
Resin |
Hardener |
| Skin |
Flush immediately with water |
Flush immediately with water |
| Eyes |
Flush with water for 15 min.Get medical attention |
Flush with water for 15 min.Get medical attention |
| Inhalation |
Provide fresh air, oxygen or Artificial respiration |
Provide fresh air, oxygen or artificial respiration |
| Ingestion |
If drowsy or unconscious no Liquids, otherwise 2 glasses Of water and induce vomiting. |
Give large quantities of water / milk do not induce vomiting. |
|
|
|
FAQ'S |
What is pot life or usable life?
Pot life or usable life is the amount of time that the adhesive has before it becomes unusable.
What is 'handling time'?
This is the time after which the bonded joints or assembly can be safely handled or
removed from any holding jigs or clamps. A further period of time is required to reach full cure and the full performance capability of the adhesive and the bonded assembly.
|
|
|