K - Grip tapes are made from polyvinyl chloride (PVC) as the backing material, which are coated with rubber pressure sensitive adhesive, they are resistant to high voltage, commonly designed for connecting separated electrical wires for electrical insulating and protection purpose. It has wonderful features such as electrical insulation, flame retardant, resistant to voltage / acid /alkali / cold etc. K - Grip is available in 5 attractive colors: Black, Red, Green, Yellow & Blue.

ISI Certified
Fire retardant and self-extinguishing
Stretchable
Firm gripping
Molds itself to any surface
Resistant to acids, alkalies and oils
Waterproof and Weather proof
Non-aging

Dry the part of wires, which are to insulated, and make them dust free to achieve a good adhesion of tape to the wire. The bare copper filaments of the wire, which are to be insulated, should be intertwined with each other so that they form a homogeneous wire and it becomes easy to wrap the insulation tape on this surface. Once we are ready with this start wrapping the insulation tape from PVC coating of the wire towards the copper wire. Wrap the exposed copper wire in such a way that it gets completely covered with the tape and no part of copper wire is left exposed and uncovered.

Insulation of electrical wires in household wiring
Insulation of cables, which form harness in automobiles
Insulation and protection to wires of electrical appliances and machines
Holding and insulating various transformer, capacitors, communication systems and instruments

Thickness	0.125mm
Tensile Strength	150 N / 10mm width per mm thickness (min)
Adhesion to Steel	1.6 N / 10mm width (min)
Adhesion to backing	1.3 N / 10mm width (min)
Electric Strength at room temperature	40 KV / mm (min)
Flammability	Self extinguishing
Electrolytic corrosion	Corrosion as specified within permissible degree
Insulation Resistance	10 5 M Ohms (min)

Normal Width	1.80cm
Normal Width	9.0m
Nominal thickness	0.125mm

Being non-aging in nature has got a very long shelf life. Store in a cool & dry place, away from moisture, excessive heat and sources of ignition.

Sr no:	Packing	Inner	Master	MRP
1	9.0m	30 pcs	480 pcs	11/-

First aid measures:
Inhalation Not expected to becomes a significnt inhalation hazard under normal conditions

Ingestion If ingested the product is not expected to cause acute reaction.Give two glasses of water to drink and consult physician.

Eyes  Not expected to come in contact with eyes.In events of exposure no effects observed except normal irritation caused due to foreign body. Wash thoroughly with running water ,if irritation continue consult physician.

Skin  Skin contact may in isolated case cause irritation if happens wash thoroughly with soap and water. if irritation continues consult physician.

Keep out of reach of children.

Is K Grip Fire Retardant?
Yes K Grip electrical insulation tapes are fire retardant and indicated as FR on it label packing.

Does K Grip comply to ISI rules?
Yes K Grip electrical tapes are ISI certified and have ISI certification of IS 7809 (Part 3 Sec-1),which also states it is fire retardant.

Can this tape be reused?
Yes K Grip because of its excellent adhesive properties can be unwounded from he wires and again winded on the wires for several number of occasion and also it would not loose its adhesion. Hence becouse of this it has got excellent reusable property.

Does K Grip has a drawback of telescoping?
No. Generally telescoping happens because of low quality of adhesive that is applied as backing to PVC tape.So it its generaly recommended to store K Grip in a cool and dry place.