FAQS
FEEDBACK
NETWORK OFFICES
CONTACT US
QUICK DOWNLOADS
BUSINESS LINES
KORES PRODUCTS
|
Adhesive & Sealant - K Bond SR
 | |
Product:
Synthetic Rubber Based Adhesive
Brand: K - Bond SR
Product Category:Maintenance and repairing
| Target Retail Audience |
Sanitary & Plumbing, Hardware and Electric, Paints, Auto Spare Parts, Masonry, Stationery and other general outlets
|
K- Bond SR (Synthetic Rubber Based Adhesive) is a solvent based single component adhesive and is widely used for any flexible bond that is resistant to water, oil and alkalies. K - Bond SR is the most suitable adhesive, which can be used in servicing workshops, repair jobs and homes for sticking leather, rubber, rexine etc.
|
|
|
Unique Features: |
Flexible bond
Easy to use
Bond is Resisitant to Oil, Water & Alkalis
Superior Formulation
|
|
|
How to use: |
-
Ensure that the surfaces to be bonded are clean, dry and free from moisture, oil and grease.
- Apply a thin film of K - Bond SR uniformly on both the surfaces.
- Unlike commonly used adhesive do not stick the surfaces immediately after applying K - Bond SR
- Keep aside both the surfaces for approximately 10 minutes to allow the adhesive to dry.
- After10 minutes the solvents will evaporate and the adhesive film will be tacky.
- Now press both the surfaces together and give maximum pressure for delicate articles. For articles like footwear, furniture etc light hammering by a hard object is necessary.
- Wipe out excess adhesive with cloth. If necessary use a little kerosene / petrol.
- For better bond keep for 2 / 3 hours before use.
- For more absorbent surfaces like wood, canvas, cork, leather, etc. a second coat of K - Bond if required may be applied after 10 / 15 minutes of the first coat and follow steps number 3 to 8.
Do not stick the surfaces immediately after applying K - Bond SR. Allow the adhesive to dry for approximately 10 minutes but not more than 30 minutes. After use wipe the excess adhesive on the nozzle and replace the cap immediately. K - Bond should not be applied on thermocole surface but it should be applied to other surface to which thermocole is to be stuck. Store in a cool dry place.
Typical Usages:
K - Bond SR bonds: Leather to Leather, rubber, metal, wood, canvas. Rubber to rubber, leather, metal, wood, canvas. Rexine to foam, rexine, wood, cardboard.
K - Bond SR can also be used in sticking glass to ceramic, glass to metal, canvas to canvas, cork to metal, linoleum and PVC tiles to floor.
|
|
|
Shelf Life: |
Shelf life is 1 year when stored in a cool, dry area at a temperature below 30 deg C
Temperature:
Bonding withstands temperature upto 80 deg C
Typical Properties:
Tensile shear Strength (M.S. to Neoprene rubber.) - 2.2 kg / cm2, strength checked after 24 hours of curing.
|
|
|
Technical Specifications: |
| Base: |
Neoprene Rubber |
| Solvent |
Combination of organic solvents |
| Solid Contents |
16 % to 18% |
| Viscosity |
10 poise as per Brookfield |
| Specific Gravity |
0.80 |
| Color |
Yellowish Brown |
| Open time |
3 hours |
|
|
|
Packaging: |
| Sr no: |
Packing |
Inner |
Master |
MRP |
| 1 |
10ml Tube |
20 pcs |
1900 pcs |
5/- |
First Aid Measures:
Skin Normally by mixing by hand it does not cause any skin irrotation,but in some cases with sensitive skin it may cause irritation or sensitization.In such cases wash the hands with plenty of water and soap and use hand gloves for application.
Eyes In case of contact with eye, wash with plenty of water and consult physician immediately.
Ingestion If swallowed, it may be harmful.Immediately consult a physician.
Keep out of reach of children.
| |
|
|