Kores Vishwas Instaplus is an ethyl based Cyanoacrylate. It is a mono component adhesive used in industrial and in house holds. It is a surface insensitive adhesive specially formulated for similar and dissimilar substrates. Bond forms instantly due to reaction of Cyanoacrylate with atmospheric humidity. Unique - does not require an external energy Source to cure at ambient temperature. It requires no special clamping and it instantly bonds Rubber, Wood, Metal, Leather, Ceramics, Ferrite, Stones, Cork, Glass, Plastics like ABS, Polycarbonate, Acrylic, Polystyrene, PVC etc. Does not bond Teflon, Nylon, Polypropylen and PTFE. Does not fill gaps

Mono component ethyl based adhesive Instant curing at room temperature Bonds wide variety of substrates High tensile and shear strength Clear bond lines Low odor and low blooming Thinner the bond line, stronger the bond. Bond withstands temperature from -400 C to +900 C Specially designed Clog Resistant Nozzle preventing wastage

Clean and dry both the surfaces. Apply one drop for each 5 square centimeters, on one surface only. DO NOT USE FINGERS FOR SPREADING. Position and join the surfaces quickly and press for few seconds. Kores Vishwas Insta Bond does not fill gaps. Thinner the bond line, stronger is the bond. Tap the nozzle gently after use and wipe with a clean cloth to ensure longer life. Store in a cool and dry place. Refrigeration extends shelf life. However bring it to normal temperature before use.

There are thousand of application.Automotive trim.ganging battries,bottle caps, bow/arrow vanes,cell phone covers,printed circuit board application,consmetic casese,fishing lures,furniture repair,honing stones,jewelry,lamp shades, loud speakers,luggage,shoe repair,steering wheels,Toys,Manufacturing / mending of electronics items, Car fixtures, Watches,cameras,Jewelry, House article, toys, leather aricles, ceramic articles, Sport goods etc.Used for making"O"ring of non-standard sizes

Bond strength:it depends on the nature and condition of the surfaces that are to be bonded.
Appearance Clear Gap Fill 0.1mm
Chemical type Ethyl
Viscosity 40 cps
Temperature Rangecomponent Ethyl
Following are the coparative tensile shear strength values for certain typical substrates:

S.S to S.S   110kg/cm2
M.S to M.S.    125kg/cm2
Aluminiume to Aluminiume    80kg/cm2
Teakwood    65kg/cm2
PVC    55kg/cm2
Neoprene Rubber   20kg/cm2
The actual values may differ on test conditions

Sealed aluminium tube has a shelf life of 12 months & once open use in 45 days. 500mg shell pack has shelf life of 12 months and once open use within 25 days.Avoid direct exposure to heat and sunlight. It is best when stroed in Refrigerator. Paking: Blister card Packing

Sr.No	Packing	Inner	Master	MRP
1	500mg Plastic Tube	400 pcs	1600 pcs	5/-
2	500mg AL Tube	720 pcs	2880 pcs	5/-
3	1gm AL Tube	720 pcs	2880 pcs	10/-
4	2gm AL Tube	240 pcs	960 pcs	19/-
5	3gm AL Tube	240 pcs	960 pcs	24/-

Eyes  In case of eye or mouth contact.hold eyelid or mouth open flush with water.Consult immediately to a physician.

Skin  In case of finge being bonded do not try to force apart.Soak fingers in warm water and remove gently.If necessary nail polish can be used.

Inhalation  Avoid prolonged breathing of vapors,as it would lead to irritation in nose and Broncial problems. If problem continues consult immediately to physician

IngestionIf swallowed. it may be harmful.Imediately consult a physician. Keep away from children.

How do i store Cyanoacrylate?
Always close lid after use.Avoid direct exposure to heat. sunlight and humidity.If stored outside a refrigerator has a shelf life of about 6 months and if stored in refrigerator the life get extended to about 2 years.
On which substrates is it best to use?
Wood,Metal,Plastic,Porcelain,Ceramics,Craft items, Jewelry, Porous and non-porous material etc.
How to clean excess Cyanoacrylate?
To clean small excess of glue simply use paper/cloth. For larger clean use Acetone or Nail Polish remover with Acetone.
Is Cyanoacrylate or its fumes toxic?
No it is not toxic Fues may cause irritation to sensitive membrances like skin, eyes, throat and nose.